Robotic Case Studies

Industry: Automotive

Application: Nut Welding

Problem: The customer had to integrate a new steel stamping into an existing robotic nut welding application. 

Read the solution here...

Industry: Automotive

Application: Spot Welding

Problem: The customer had to integrate a new steel stamping into an existing robotic spot welding application. 

Read the solution here...

Industry: Sheet Metal

Application: Pick and Place

Problem: The customer had sheet metal panels of various sizes that were sharp on the edges which were difficult to move and caused ergonomic issues.

Read the solution here...

Industry: Appliance

Application: Pick and Place

Problem:  The customer had a base frame that was being manually loaded onto two different conveyors which was leading to a cycle time issue.

Read the solution here...

Industry: Foundry

Application: General Automation

Problem: The customer had a dross box being manually cleaned which was a safety hazard due to the heat and explosiveness of the molten material.

Read the solution here...

Industry: Automotive Glass

Application: Dispensing and Vision System

Problem: The customer was applying urethane manually around a piece of glass causing quality issues and an inconsistent pattern.

Read the solution here...

Industry: Automotive Glass

Application: Dispensing

Problem: The customer was having problem putting a urethane bead into an automotive glass seal.

Read the solution here...

Industry: Automotive Glass

Application: Vision System

Problem:The customer wanted to dispense urethane and confirm that each clip contained the required amount of urethane.

Read the solution here...